Non-destructive testing
NCCEF offers a wide range of non-destructive testing and evaluation techniques. These range from large state-of-the-art X-ray equipment with ultra high defect resolution to small hand held ultrasonic equipment for detecting delaminations in composite components.
Inspection of components can be carried out at NCCEF or in the field. Interpretation of the ultrasonic NDT results can be performed by ASNT and PCN Level 3 inspectors if required.
Capabilities
- X-ray tomography
- Ultrasonic C-scan
- Portable phased array ultrasonic examination
- Hand held ultrasonic NDT System
- Borescope (6mm diameter, 3m length)
- Active pulsed thermography system
- Laser shearography system
Equipment | Type | Fixed/Portable | Maximum Size or Weight of Sample | Main Uses |
---|---|---|---|---|
Metris X-tek 320kV Unit | X-Ray Tomography | Fixed | 410mm x 410mm / 100kg 3µm pixel size | 3D reconstruction of the internal structure of a sample |
Xradia MicroXCT | X-Ray Tomography | Fixed | 15kg capacity 40mm field of view / 25µm pixel size 0.65mm field of view / 0.4µm pixel size | 3D reconstruction of the internal structure of a sample |
Xradia NanoXCT | X-Ray Tomography | Fixed | 0.5kg capacity 65µm field of view / 65nm pixel size 15µm field of view / 15nm pixel size | 3D reconstruction of the internal structure of a sample |
Metris X-tek XTH225 | X-Ray Tomography | Fixed | 15kg capacity 5mm field of view / 3µm pixel size 25mm field of view / 17µm pixel size | 3D reconstruction of the internal structure of a sample |
Rapiscan RTT20 | X-Ray Tomography | Fixed | 200mm diameter samples 1mm spatial resolution at 120 frames/sec | 3D reconstruction of the internal structure of a sample |
Midas Water Jet C-Scan | Through Transmission Ultrasonic | Fixed | 2m x 2m flat or slightly curved panels | Spatial position, depth and size of defects in composite plates |
UltraPac II Immersion C-Scan System | Pulse Echo and Through Transmission Ultrasonic | Fixed | 300mm x 300mm x 200mm | Spatial position, depth and size of defects in composite plates |
Olympus Omniscan MX | Phased Array Ultrasonic | Portable | Any size – dependent on time available and probe type | Spatial position, depth and size of defects in metallic or composite components |
Olympus Bondmaster 1000e+ | Ultrasonic | Portable | Any size – dependent on time available and probe type | Delaminations and disbands in composite samples |
Olympus IPLEX LX Boroscope | Optical | Portable | 3.5m length of reach for the endoscope with 130° articulation | Surface defects and structure inside components |
ThermoSensorik | Active Pulsed Thermography | Portable | 1.5m x 1.5m surface - 15µm pixel size | Spatial position, depth and size of defects in metallic or composite components |
Dantec Q800 | Shearography | Portable | 0.7m x 0.7m with 4 laser diode | Spatial position, depth and size of defects in composite plates |